The characteristic of 201 stainless steel is acid-resisting, alkali-resistance, high density, no bubbles by polishing, no pinhole and etc., It is high-quality material in the production of various straps and covers.
Application area:
Decorative tubes, industrial tubes, water tank,and some shallow stretch products.
Chemical composition(WT%)
(C) :≤0.15
(Si) :≤0.75
(Mn) :5.5 to 7.50
(Cr) :16.0 to 18.0
(N) :≤0.25
(P) :≤0.060
(S) :≤0.030
(Ni) : 0.8 to 1.2%
(Cu) : Half 0.8% ,High 1.5%
physical property
tensile strength:≥520MPa
Yield strength:≥275MPa
Elongation:55 to 60%
The normal size of 201 stainless steel sheet is 1000mmx2000mm, 1219mmx2438mm, 1500mmx6000mm,1800mmx6000mm, thickness range from 0.3mm to 12mm are all ready is stock.
Usually, it only takes 3 working days for us to make delivery if the products are ready in stock.
Of course, unusual size can also be customized according your request.
FAQ:
Will the 201 stainless steel sheet gathers rust easily?
When the brown rust appeared on 201 stainless steel surface , people may be surprised and think if it gathers rust, it is not stainless steel any more and there is some problem with 201 stainless steel. In fact, this is a misconception of stainless steel because they do not know stainless steel too much.
There is a thin and solid chromium oxide film (protective film) on the cover of stainless steel to prevent the infiltration of oxygen atoms. Once the protective film is destructed by something, the stainless steel will also gather rust. So the surfaces of stainless steel must be cleaned and scrubbed regularly to remove attachments and eliminate external factors that cause corrosion.
201 HL surface stainless steel sheet
201 2B surface stainless steel sheet
201 8K surface stainless steel sheet
201 NO.1 surface stainless steel sheet