By adding Mo element to 316 stainless steel, the corrosion resistance and strength in high temperature has greatly improved. It can resist high temperature from 1200℃ to 1300℃ and it is also can be used under very tough conditions.
Application area:
Chemical industry, marine structures, paper industry,heat exchanger, oxalic acid industry and many other areas.
Chemical composition(WT%)
(C) :≤0.08
(Si) :≤1.00
(Mn) :≤2.00
(Cr) :16.0 to 18.5
(P) :≤0.035
(S) :≤0.030
(Ni) : 10 to 10.4
(Mo): 2.0 to 3.0
physical property
tensile strength:≥520MPa
Yield strength:≥205MPa
Elongation:more than 40%
The following table is the size of the pipe. For any other detail information, please feel free to contact us.
Usually, it only takes 3 working days for us to make delivery if the products are ready in stock.
Of course, unusual size can also be customized according your request.
FAQ: How to preserve stainless steel?
Storage should pay attention to moisture, dust, oil, lubricating oil, surface rust, poor welding and corrosion resistance decreased. When the water between film and steel plate is immersed in water, the corrosion rate is faster than that without coating.The warehouse should be placed in a clean, dry ETS wind place, keep the packaging state of the original film, the stainless steel should avoid direct sunlight, the film should periodically check if the metamorphic film (film life 6 months) should be immediately replaced with a pad of paper packaging material if soaked, to prevent corrosion should be immediately removed pad of paper.
316 stainless steel tube
316 stainless steel tube in stock
316 seamless stainless steel tube
316 stainless steel tube (packing)